ULTIMA-S
ULTIMA represents a ground breaking step for lighting integration into architecture or furniture. Its miniaturised design and low glare makes it blend into any building structure and nearly disappear from sight. Thanks to numerous options it can be used in many different lighting applications and is even powerful enough to handle general lighting.
The perfect blend of miniaturisation and functionality
A cross section of only 10 mm x 13 mm (H x W) combined with optics and lumen packages sufficient even for general lighting make ULTIMA-S suitable for many different applications, especially where integration into architecture or furniture is required.
Six different optics based on nanotechnology, ranging from spot to asymmetric plus an opal diffusor, outstanding control of glare (UGR < 13) and color consistency as well as various lumen packages and CCTs offer outstanding lighting quality and options.
ULTIMA has been designed with sustainability in mind. Thanks to miniaturisation it only uses a minimum of materials - a 1 meter long luminaire with Nano optics weighs just 133 g. It outputs up to more than 20 Lumen per gram of luminaire weight (without PSU). All of the nonelectrical components can be recycled, 87% of which are highly purified mono materials. The electrical components make up only 13 g per fixture meter.
ULTIMA-S
ULTIMA was designed with miniaturisation, integration and sustainability in mind. It is based on two master technologies: CSP LEDs and NanoRay optics. The result is an extremely small luminaire that offers the same optical options as much larger systems without compromising on light quality, as illustrated by an UGR <13 and a high colour consistency over angle.
There are 7 different lighting optics to choose from, covering elliptical light distribution from 15° to 60°, an asymetrical and a batwing optic plus an opal diffusor.
Besides further light-related options like lumen package and CCT there are also various mounting options plus cable/connector configurations as well as housing and antiglare colours to chose from to suit almost any installation scenario.
The length is likewise freely choosable which, combined with the minimal cross section of 10 mm x 13 mm (H x W), makes it an ideal candidate for integrations or very confined spaces, both in architecture and furniture.
Technical Specification
Dimensions
Electrical & Output Data
| Voltage | VDC (23 Vmin, 25 Vmax) | ||||
|---|---|---|---|---|---|
| 6 W/m | 10 W/m | 15 W/m | 20 W/m | 25 W/m | |
| Power (W/m) | 6 | 10 | 15 | 20 | 25 |
| Efficacy (lm/W) | 103 | 101 | 106 | 99 | 100 |
| max. length (m)+ | 2.02 | 2.02 | 2.02 | 2.02 | 2.02 |
| max. serial run length (m) | 7.5 | 5.0 | 5.0 | 3.5 | 3.0 |
| CRI (up to) | 95 | 95 | 95 | 95 | 95 |
| Color temperature | 6 W/m | 10 W/m | 15 W/m | 20 W/m | 25 W/m | |
|---|---|---|---|---|---|---|
| Order Code | Delivered CCT | lumen/m (lm/m)* | ||||
| W822 | 2,200 K | 500 | 900 | 1480 | 1700 | 2190 |
| W927 | 2,700 K 2,700 K | 460 | 840 | 1390 | 1560 | 2150 |
| W930 | 3,000 K 3,000 K | 490 | 870 | 1420 | 1620 | 2240 |
| W935 | 3,500 K 3,500 K | 500 | 910 | 1450 | 1670 | 2280 |
| W940 | 4,000 K 4,000 K | 530 | 940 | 1480 | 1700 | 2330 |
Mounting options
Please note: Mounting clips are automatically included with the luminaire when chosen as part of the order code (PCL).
Clips for surface mounting.
Clips for surface mounting.
Mounting profile with sufficient space behind luminaire to place connectors. Profile is powder-coated white or black (RAL 9003 and 9004) and covers entire flank of luminaire.
Please note: High mounting profile is automatically included with the luminaire when chosen as part of the order code (HMP). Profile is cut to length of luminaire. The color of the mounting profile is determined by the configurated luminaire profile color (black for black; white mounting profile for silver luminaire profile). End caps for mounting profile are available separately.
End caps for high mounting profile.
End caps for high mounting profile.
Grid clips are twisted onto T-bars of suspended ceiling. Very practical for retrofits.
Please note: Grid ceiling clips are automatically included with the luminaire when chosen as part of the order code (GCC).
Adjustable clips can be used to freely aim the luminaire from 0° to approx. 125°.
Please note: Adjustable mounting clips are automatically included with the luminaire when chosen as part of the order code (AMC).
Adjustable mounting clip for easy adjustment of the luminaire.
Recessed installation with trim of individual luminaires in plasterboard ceiling or other boards.
Further required accessories are end caps and mounting springs for the mounting profile.
Please note: Choose mounting option MAG in configurator to be able to install a luminaire in the separately available mounting profile with trim.
We recommend cable configuration MO.
Maximum allowed wattage per meter for recessed installations is 20 W/m. If you want to dim an ULTIMA-S with magnets that is mounted in low ambience noise surroundings, we recommend using a controller from the IN.finite™ range optimised for ULTIMA (article codes ending on -ULT).
Mounting profile for individual luminaires, recessed with trim, length 2 m; max luminaire length 1950 mm.
Mounting profile for individual luminaires, recessed with trim, length 2 m; max luminaire length 1950 mm.
Mounting spring for recessed mounting.
Recessed installation of individual luminaires in plasterboard ceiling, subsequently plastered in.
Further required accessories are endcaps and plaster-in dummies for the mounting profile.
Please note: Choose mounting option MAG in configurator to be able to install a luminaire in the separately available trimless mounting profile. We recommend cable configuration MO.
Maximum allowed wattage per meter for recessed installations is 20 W/m.
If you want to dim an ULTIMA-S with magnets that is mounted in low ambience noise surroundings, we recommend using a controller from the IN.finite™ range optimised for ULTIMA (article codes ending on -ULT).
Mounting profile for individual luminaires, recessed trimless plaster-in, length 2 m; max luminaire length 1950 mm.
E. g. surface mounted on suitable steel structure or with the help of an attached separate steel strip.
Please note: Surface needs to be suitable for magnetic mounting, e. g. separately available steel strip (article number 18100049).
The magnets are automatically pre-mounted on the luminaire when chosen as part of the order code (MAG).
If you want to dim an ULTIMA-S with magnets that is mounted in low ambience noise surroundings, we recommend using a controller from the IN.finite™ range optimised for ULTIMA (article codes ending on -ULT).
Metal strip with adhesive tape on the backside for easy installation on almost every surface.
E. g. recessed into swallow-tail groove cut into wooden board for furniture integration.
Please note: Surface needs to be suitable for magnetic mounting, e. g. separately available steel strip (article number 18100049). The magnets are automatically pre-mounted on the luminaire when chosen as part of the order code.
Maximum allowed wattage per meter for recessed installations is 20 W/m.
If you want to dim an ULTIMA-S with magnets that is mounted in low ambience noise surroundings, we recommend using a controller from the IN.finite™ range optimised for ULTIMA (article codes ending on -ULT).
Metal strip with adhesive tape on the backside for easy integration into furniture.
No mounting accessories are delivered with the luminaire. Intended for cases where longer lengths of high mounting profiles with several luminaires are to be used for continuous lines. These can be ordered separately and cut to the required length.
High mounting profile with space for connectors under luminaires, length 2 m.
High mounting profile with space for connectors under luminaires, length. 4 m
High mounting profile with space for connectors under luminaires, length 2 m.
High mounting profile with space for connectors under luminaires, length 4 m.
End caps for high mounting profile.
End caps for high mounting profile.