KALYPSO
KALYPSO is a minimalistic luminaire suitable for wall grazing. Due to its three optics and its IP67 rating, a high range of opportunities is covered. A maximum output of 4,290 lm/m combined with a CCT ranging between 2,000 K to 5,000 K makes KALYPSO a multifunctional luminaire.
Encapsulated linear LED luminaire with linear lenses
High lumen output in minimalistic design with a small cross section of (W x H) 20.5 mm x 25.5 mm.
Screwed diffuse end caps for an optimal sealing at both ends of the luminaire.
A special chamber for the water management and drainage option for end caps.
KALYPSO
KALYPSO is a minimalistic luminaire suitable for wall grazing. Due to its three optics, IP67 and IK rating, a large range of applications is covered. A maximum output of 4,290 lm/m combined with a CCT ranging between 2,000 K to 5,000 K makes KALYPSO a multifunctional luminaire.
It is IK10 certified and therefore particularly robust against environmental impacts. The utilized polyurethane features a 5 times higher chemical resistance and a 10 times lower water transmission compared to typical silicones for LED applications in the relevant temperature range (-50°C to 80°C). The profile with a small cross section of (W x H) 20.5 mm x 25.5 mm allows the use of three different linear lenses. 10° grazing light and 30° or 60° general illumination optics are available and guarantee a targeted illumination. Screwed diffuse end caps for an optimal sealing at both ends of the luminaire. It is available in five standard lengths and is supplied ready to plug in with a IP67 mini connector. The installation is realized with invisible light joints and connections. It is perfectly suited for the accentuation of structured facades and walls, as well as for highlighting architectural details on buildings, windows and gables.
Technical Specification
Lighting distribution curves
Dimensions
Electrical & Output Data
| Voltage | VDC (23 Vmin, 25 Vmax) |
|---|---|
| HD12 | |
| Power (W/m) | 12 |
| Efficacy (lm/W) | 105 |
| max. length (m) | 1.83 |
| max. serial run length (m) | 5.0 |
| CRI (up to) | 85 |
| Color temperature | HD12 | |
|---|---|---|
| Delivered CCT | lumen/m (lm/m)* | |
| W822 | 2,200 K | 360 |
| W850 | 5,000 K | 500 |
| Total | 860 | |
Mounting options
Powder-coated indoor in-ground channel. End caps required to cover the ends of the inground channel before installation. Available with or without drainage nozzle.
Powder-coated indoor in-ground channel. End caps required to cover the ends of the inground channel before installation. Available with or without drainage nozzle.
Endcap set without drainage nozzle.
Clip with mounting lock for Contour 010 Inground Channel.
End cap set with drainage nozzle.
Use to take the fixture out of the inground frame. Use according to the mounting instruction.
