IP67 protected field cuttable luminaire with simple assembly that can be easily and individually adapted to any application.
Cut on site to the desired length.
Quick installation using IP67 connector assembly assembled by adhesive bonding or with clips against external influences (IP67 protection).
A white base profile with lateral fins and reflective surface ensures high lumen currents of up to 1,880 lm/m.
New design freedom with HYDRALUX™, depending on the step measurement this IP67 protected luminaire can be cut on site to the desired length and then easily assembled by adhesive bonding or with clips.
A particularly innovative feature here: the IP67 protection of the connectors can also be done on site. So this luminaire can be easily and individually adapted to any application. A white base profile with lateral fins and reflective surface ensures high lumen currents of up to 1,880 lm/m. The encapsulated light lines are a demonstration of quality workmanship and performance. With the ability to join separate units together HYDRALUX™ eliminates any light gap or spaces. The utilized polyurethane features a 5 times higher chemical resistance and a 10 times lower water transmission compared to typical silicones for LED applications in the relevant temperature range (-50°C to 80°C). Even in difficult applications, e. g. with only very little space, you can rely on HYDRALUX™. The sophisticated concept, the minimum bending radius of only 30 mm and the small cross section of 12.5 x 3.5 mm (W x H) allow the use virtually anywhere, such as in coves, contours, furniture, shops and architectural details.
|Voltage||VDC (23 Vmin, 25 Vmax)|
|max. length (m)||7.5||5.0||4.0|
|max. serial run length (m)||7.5||5.0||4.0|
|CRI (up to)||95||85||85|
Clear plastic mounting clips. Use to mount the product on hard surfaces. Sold as set of 50 pieces.
Double sided 3M adhesive tape roll. Use to mount products on surfaces.