ADONIS ARCHITECTURAL IP67
With its powerful light engine within a miniaturized design, the ADONIS ARCHITECTURAL emphasizes the architectural features of building structures. Thanks to its perfect integration, this luminaire is ideal for grazing applications as well as for direct lighting on façades and ceilings.
Miniaturized design for maximum lighting effects
A multitude of options include several power levels and color temperatures plus a variety of light engines ranging from static white to RGBW, as well as 10°, 30° or 60° and opal optics to choose from.
Polyurethane is utilized in ADONIS ARCHITECTURAL to make it more resistant to impact from salt water UV-light and solvents. High protection against vandalism thanks to a robust, powder-coated aluminum profile with an IK10 certification.
The choice between solid and translucent end caps combined with smart cabling and mounting options enables seamless light lines.
ADONIS ARCHITECTURAL IP67
Miniaturized design meets architectural scales: Its exceptional integration makes ADONIS ARCHITECTURAL an excellent choice for grazing applications and direct illumination on facades and ceilings.
It is IK10 certified and therefore particularly robust against environmental impacts. The utilized polyurethane features a 5 times higher chemical resistance and a 10 times lower water transmission compared to typical silicones for LED applications in the relevant temperature range (-50°C to 80°C). The profile with a small cross section of (W x H) 20.5 mm x 28.5 mm is available in three colors and allows the use of four optics. 10° grazing light and 30° or 60° general illumination optics as well as opal encapsulation are available and guarantee a targeted illumination. The translucent end caps allow for seamless light lines while the solid endcaps eliminate light spills at both ends of the run. ADONIS ARCHITECTURAL can be freely scaled in length and equipped with a range of light sources - from static white to dynamic white and RGBW. With an efficiency of up to 130 lm/W and a maximum luminous flux of 4730 lm/m, the ADONIS ARCHITECTURAL combines performance and efficiency and takes the next step towards sustainability and CO2 footprint reduction.The installation is realized with invisible light joints and connections. It is perfectly suited for the accentuation of structured facades and walls, as well as for highlighting architectural details on buildings, windows and gables.
Technical Specification
Lighting distribution curves
Dimensions
Electrical & Output Data
| Voltage | VDC (23 Vmin, 25 Vmax) | ||
|---|---|---|---|
| 12 W/m | 24 W/m | 36 W/m | |
| Power (W/m) | 12 | 24 | 36 |
| Efficacy (lm/W) | 59 | 63 | 58 |
| max. length (m) | 4.02 | 4.02 | 2.02 |
| max. serial run length (m) | 5.0 | 4.0 | 2.0 |
| CRI (up to) | 84 | 84 | 84 |
| Color temperature | 12 W/m | 24 W/m | 36 W/m | |
|---|---|---|---|---|
| Delivered CCT | lumen/m (lm/m)* | |||
| 820 | 2,000 K | 320 | 680 | 930 |
| 835 | 3,500 K | 390 | 850 | 1150 |
| Total | 710 | 1520 | 2080 | |
Mounting options
Stainless steel clip with washer. Clips inside the fixture profile for invisible mounting. Use according to the mounting instruction.
Stainless steel clip with washer. Clips inside the fixture profile for invisible mounting. Use according to the mounting instruction.
Metal mounting block with set screw for vertical applications. Install inside the fixture profile to stop the fixture from sliding. Use according to the mounting instruction.
40 mm adjustable mounting arm. Supplied according to the selected profile color (RAL9003, RAL9005, RAL9022). The set includes mounting clip incl. screws for fixing the luminaire. Allows tilting by 120° in any direction. Use according to the installation instructions.
Digits in order code: A0
100 mm adjustable mounting arm. Supplied according to the selected profile color (RAL9003, RAL9005, RAL9022). The set includes mounting clip incl. screws for fixing the luminaire. Allows tilting by 120° in any direction. Use according to the installation instructions.
Digits in order code: A1
200 mm adjustable mounting arm. Supplied according to the selected profile color (RAL9003, RAL9005, RAL9022). The set includes mounting clip incl. screws for fixing the luminaire. Allows tilting by 120° in any direction. Use according to the installation instructions.
Digits in order code: A2
300 mm adjustable mounting arm. Supplied according to the selected profile color (RAL9003, RAL9005, RAL9022). The set includes mounting clip incl. screws for fixing the luminaire. Allows tilting by 120° in any direction. Use according to the installation instructions.
Digits in order code: A3
140 mm adjustable mounting clip with a tilt of 60° to each side, comes together with profile colors white and gray. Use according to the mounting instruction.
140 mm adjustable mounting clip with a tilt of 60° to each side, comes together with profile color black. Use according to the mounting instruction.
25 mm threaded pin with washer and nut. For a vandal resistant installation. Use according to the mounting instruction.
Robust Inground frame for indoor & outdoor applications. It is IK10 certified and can be walked on and rolled over by vehicles with air-filled tyres.
Aluminum frame (silver anodized) cut to luminaire length incl. styrofoam dummy and endcap/clip set for stand-alone luminaire applications. Use according to the mounting instruction.
Aluminum frame (silver anodized) in 2 m length incl. styrofoam dummy for lightline applications. Use according to the mounting instruction.
Aluminum frame (silver anodized) in 4 m length incl. styrofoam dummy for lightline applications. Use according to the mounting instruction.
Aluminum endcap with screws and sealing plug. Required to cover the ends of the inground frame before installation. Use according to the mounting instruction.
Clip with mounting lock, screw and washer for inground frame. Use according to the mounting instruction.
Aluminium connector for joining inground frames to create lightlines. Use according to the mounting instruction.
Use to take the fixture out of the inground frame. Use according to the mounting instruction.
The glare shield can be combined with the following mounting accessories: SH | SV | A0…A3 | ML
Aluminium glare shield in 1 m length. For a better glare control for people passing by. Use according to the mounting instruction.
Aluminium glare shield in 2 m length. For a better glare control for people passing by. Use according to the mounting instruction.
Aluminium glare shield in 1 m length. For a better glare control for people passing by. Use according to the mounting instruction.
Aluminium glare shield in 2 m length. For a better glare control for people passing by. Use according to the mounting instruction.
Aluminium glare shield in 1 m length. For a better glare control for people passing by. Use according to the mounting instruction.
Aluminium glare shield in 2 m length. For a better glare control for people passing by. Use according to the mounting instruction.