|
- Infrared Remote Control for modules VarioControl 3 Channel Slim, Vario Control 3 Channel and VarioControl 8 Channel
Circuit for direct control of LED modules, 1 input to the power supply, 3 power outputs, 1 input for an IR receiver, 1 output signal for control LED The circuit (Vario Control 3 Channel) for direct operation of LED modules. Supply voltages in the range from 8 to 24 Vdc. Brightness adjusting of LED modules with PWM control (3 outputs; K1 to K3; 2A max.) Operation of the circuit: IR remote control (Vario Control Remote IR) and connected IR receiver. A function display can be connected.
Circuit for direct control of LED modules, 1 input to the power supply, 3 power outputs, 1 input for an IR receiver, 1 output signal for control LED The circuit (Vario Control 3 Channel) for direct operation of LED modules. Supply voltages in the range from 8 to 24 Vdc. Brightness adjusting of LED modules with PWM control (3 outputs; K1 to K3; 2A max.) Operation of the circuit: IR remote control (Vario Control Remote IR) and connected IR receiver. A function display can be connected.
- Circuit for direct control of LED modules, 2 inputs for power, 8 power outputs, 1 input for an IR receiver, 1 output signal LED (red / green)
- Circuit (Vario Control 8 Channel BI) for direct operation of LED modules
- Supply voltages in the range from 8 to 24 Vdc.
- Brightness adjusting of LED modules with PWM control (8 outputs, 2A max.)
- Operation of the circuit: IR remote control (Vario Control Remote IR) and connected IR receiver.
- A function display can be connected.
- Circuit for direct control of LED modules, 2 inputs for power, 8 power outputs, 1 controller 8 to 24 Vdc. The settings are made with the 3 preconfigured buttons. All data and settings remain without power supply.
- Direct operation of LED modules.
- Supply voltages from 8 to 24 Vdc.
- Two separate inputs for supply voltages (UinA and UinB), simultaneous operation of LED modules with different voltage (or total allocation of the two power supplies).
- Voltage: Connect UinA+ with UinB + and UinAUinB.
- The adjustment of the brightness of the LED modules is controlled by PWM outputs. 8 outputs (Led1 to Led8), each up to 2A.
- Operation on controller button (speed function).
Circuit for direct control of LED modules, 1 input for power-supply, Application: DMX receiver designed for the direct operation of LED modules. Supply voltages in the range from 8 to 24 Vdc. Brightness adjustment of the LED modules made by the PWM outputs. 4 outputs (K1 to K4), each up to 2A Programming of DMX address via programming input (see description below)
Circuit for performance enhancement (booster) and decoupling 1 input for power, 4 power outputs, 4 PWM inputs Direct operation of LED modules Supply voltages in the range from 8 to 24 Vdc. Brightness adjusting of the LED modules by usage of pwm outputs, correspond to the respective input signal There are 4 outputs available (Out1 to Out4), each up to 2A. The inputs receive their signals (PWM) from an external controller. Only for operation with PWM circuits, which provides a common positive pole for the LED Modules.
- Circuit for direct control of LED modules, 1 input for power-supply,
- Application: DMX receiver designed for the direct operation of LED modules.
- Supply voltages in the range from 8 to 24 Vdc.
- Brightness adjustment of the LED modules made by the PWM outputs. 4 outputs (K1 to K4), each up to 2A
- Programming of DMX address via programming input (see description below)
|
|
|
| 
